RUTLAND 1200º High-Temp Spray Paint adheres to steel, cast iron, aluminum, and brick, and is great for grills, stoves, smokers, stove pipes, and more!
RUTLAND 1200ºF Hi-Temp Spray Paint provides both a beautiful flat black finish as well as durability to any stove or grill, and will look great for years while keeping rust at bay. This quality paint adheres to steel, cast iron, aluminum, and brick, and is great for grills, stoves, smokers, stove pipes, fireplace inserts, furnaces, barbecues, mailboxes, lampposts, fireplace tools, brass, firebrick, and chimney caps.
12 oz Spray Can
Flat Black
No primer needed
1 year UV resistance after application
Fast drying and color-fast
Non-toxic when dry
Weather- and heat-resistant
Indoor and outdoor use
Heat cure is not required, but best results are obtained after heat curing
Can be used to paint the inside of a masonry firebox
Not for direct food contact
Made in the USA
WARNING: This product can expose you to chemicals including Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Product Details
Weight: .99 lbs
Dimensions: 7.75 × 2.625 × 2.625 in
Safety Data
RUTLAND 80 SDS
Directions
Wear appropriate eye, hand, and respiratory protection. Do not expose can to extreme heat or cold. Allow can to warm to room temperature before using. Do not apply in high heat or humidity.
USE ON COOL SURFACES ONLY (min. 50°F). Fire must be completely out!
PREP SURFACE. Remove all loose, scaly material and sand rusty spots with fine sandpaper. Remove any polish or wax with lacquer thinner. MASK OR PROTECT SURFACES YOU DO NOT WANT PAINTED. If practical, move item to be painted to a shaded outdoor location downwind and away from any objects of value to eliminate overspray issues.
SHAKE CAN VIGOROUSLY for one minute after metal agitator is heard. Repeat for 10 seconds for each minute of spraying.
REQUIRED: Hold can no closer than 10-12 inches from work surface. When spraying, open and shut valve completely with tip of finger. DO NOT ATTEMPT TO COVER WITH ONE COAT. Move can rapidly back and forth, releasing nozzle at the end of each stroke. Use short dusting strokes, allowing paint to become tacky between coats.
To prevent clogging nozzle, after each use, turn can upside down and spray until only clear gas is emitted. Wipe clean.
For best results, allow paint to air-dry for 24 hours, then heat cure to 500°F. Be sure all paint is dry before re-firing. Provide ventilation when firing for the first time after painting. Some smoke and odors are given off during this process.
Note: Painted surface must not come in direct contact with food.
High Heat Spray Paint
BOSNY HI-TEMP 1039 SPRAY PAINT GLOSS BLACK - www.
FORREST Hi-Temperature 1200 deg. Stove and Fireplace
Hi-Temp Silicone Coating Spray - White - Design Engineering, Inc
Shop High Temp Engine Spray Paint online
HI-Temp Spray Paint at best price in Nashik by Laxmi Batteries
Bosny BOSNY Hi-Heat Resistant 400°F Aerosol Spray Paint (400 ml, Silver) silver Spray Paint 1 ml Price in India - Buy Bosny BOSNY Hi-Heat Resistant 400°F Aerosol Spray Paint (400 ml, Silver)
Paints, Polishes & Coatings
Shop High Temp Engine Spray Paint online
How To Draw Spray Paint Can - Cool Spray Paint Can Drawing, HD Png
Rutland 1200-Degree F Multi-Use Hi-Temp Flat Paint Spray Can, 12 Fluid Ounce, Black by Rutland : : Car & Motorbike
Bosny High Heat Hi Temp Resistant 1200 F Spray Paint - #1039 Gloss Black
Shop Hi Temp Spray Paint For Engine Silver online
Chimney 43407 Pewter Gas Fireplace Surround Paint - 12 Oz - Spray