4.8 (325) · $ 2.99 · In stock
Buy a Bondtech CHT® Vol Coated Brass Nozzle from Spool3D in Canada for 3D printers at low prices online. These are nozzles for high flow applications Increase the Max Volumetric Flow of your Volcano heat block by 50% They are manufactured by Bondtech in-house, and will fit the following blocks/printers: E3D Volcano blocks Other Volcano type blocks Artillery Sidewinder X1 and X2 Anycubic Vyper FLSUN Super Racer Artillery Genius Pro Anycubic Kobra and Kobra Max Lulzbot TAZ MOARstruder Others compatible with Volcano… Features 1 unit per pack; Available sizes : 0.4, 0.6, 0.8, 1.0, and 1.2mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires a 6mm wrench Main Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% (check picture with test data) Competitive price/performance price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standard: Volcano (M6×1×14.5×21) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT™ technology: Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. White Paper Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface. Recommended Materials Use this nozzle with the following materials: PLA ABS HIPS PC TPU TPE Nylon PETG ASA PP PVA For technical and abrasive materials we recommend to use other nozzles in our range. Different nozzle sets for different materials We recommend you to have several sets of nozzles because: Using different materials with the same nozzles causes deposit build-up inside the nozzle. These deposits will cause blockages. We recommend changing nozzles when changing materials. Free shipping in Canada on qualifying orders of 3D printer spare parts.
Bondtech CHT BiMetal Volcano V6/M6 Coated Nozzle – Fabreeko
Nozzle רב מימד Rav Meimad
, Free shipping in Canada for orders over $140 before tax. (via Canada Post), Copper and Hardened Steel nozzles for high flow applications with
Bondtech CHT BiMetal RepRap M6 Coated 3D Printer Nozzle
Bondtech CHT ® coated brass 5 Pack nozzles for Volcano block
Bondtech Shaft assembly BMG –
Bondtech®CHT® Coated Brass Nozzle - RepRap
Bondtech CHT® MK8 Coated Brass Nozzle
Nozzles for High Flow applications, Optimized for 1.75mm filament;, Compatible with 2.85mm filament., Requires 8mm wrench, Fit the following
Bondtech CHT MK8 Coated Brass Nozzle
Description These are nozzles for High Flow applications They are manufactured by Bondtech in-house, and will fit the following hotends/blocks
Bondtech CHT® Coated Brass 5 Pack Nozzle for RepRap 1.75/2.85 blocks
Bondtech CHT ® Nozzles for high flow applications and strong parts
MK8 Brass Nozzle 1.75mm - Various Sizes –
Bondtech CHT Coated Brass Nozzle for 3D Printing
Bondtech CHT® Coated Brass 5 Pack Nozzle for RepRap 1.75/2.85 blocks –
Nozzle Packs - Bondtech
This Bondtech CHT ® RepRap M6 (MOS) nozzle increases the melting capacity of your hotend, to build faster and to save your time. It also improves the
Bondtech CHT ® M6 Coated Brass Nozzle